Home / Expert Answers / Electrical Engineering / to-develop-a-ld-program-to-control-a-carwash-sequential-operation-rslogix500-4-outputs-mot-pa833

(Solved): - To develop a LD program to control a carwash sequential operation. - RSLogix500 - 4 Outputs (Mot ...



- To develop a LD program to control a carwash sequential operation.
- RSLogix500
- 4 Outputs (Motors),
- 1 input (proximity

- To develop a LD program to control a carwash sequential operation. - RSLogix500 - 4 Outputs (Motors), - 1 input (proximity switch), 2 inputs (StartPB/StopPB) Instructions Use SQO instruction to control a car wash station. This machine has a conveyor to convey the car to the washing point, which is detected by a proximity sensor (l:1/5). There are also start/stop pushbutton to start/stop the system, At the washing point, three operations of Soap , Brush , and Rinse are performed. Once the washing sequence, which is shown below is done, the conveyor starts again to move the car out of the washing area. Use SQO instruction to control the car wash machine.


We have an Answer from Expert

View Expert Answer

Expert Answer


Answer:To develop a LD program to control a carwash sequential operation using RSLogix500, the following steps can be taken:Create a new program a
We have an Answer from Expert

Buy This Answer $5

Place Order

We Provide Services Across The Globe