(Solved): 1. A pneumatic controller uses microprocessor technology and special programming to perform cont ...

1. A pneumatic controller uses microprocessor technology and special programming to perform controller functions. 2. __ is the selection of preprogrammed software packages embedded in a controller representing available features that can be chosen. 3. is the time that it takes to access all $$\mathrm{I}/\mathrm{O}$$ points and go through a configuration program. 4. A digital control chart is a type of configuration format consisting of a series of conditional statements, parallel paths, and action blocks that begins with a Start command and ends with an existing scan. 5. $$A(n)\dots$$ controller is an electric controller that has DC electric current as the output. 6. A(n) _ is a view into a digital control system through which an operator can observe and control a process. A. controller B. pressure gauge C. operator interface D. instrument 7. A stand-alone display system is designed for use with larger digital control systems and has the electronics and display packaged separately in different enclosures since the control system is too large to be packaged with the display. 8. $$\mathrm{A}(\mathrm{n})\dots \_$$is a display system designed so that touching specific spots on a screen produces an action. 9. A PC-based display system is a display system that uses standard personal computer hardware and special software to display full graphics, control functions, alarms, trends, etc. 0. A digital recorder is a device that uses local memory to record process data, which is then displayed on digital that can have the appearance of old-style strip chart recorders. A. gauges B. display screens C. sensors D. indicators 11. A __ is one of the various programming methods that have been developed to provide a simplified method for instructing various digital control systems on how to control a process. A. programmable logic controller B. distributed control system C. pneumatic control system D. configuration format 12. is a configuration format where the configuration is selected from a list of available functions. A. Ladder logic B. Pick and choose C. Function block configuration D. Structured programming 13. Function block configuration is a configuration method that uses a library of functions provided by the manufacturer. 14. Ladder logic is a configuration method that consists of two vertical rails, the right one being the source and the left one being the end, and the sequential rungs of logic between the two. 15. text is a type of configuration that is very similar to Microsoft $${}^{?}$$ Visual Basic $${}^{?}$$ or older structured programming languages.